Difference between revisions of "HS Summer2018"

From class_wiki
Jump to: navigation, search
(Schedule)
(Schedule)
Line 18: Line 18:
 
** Verified that new, long M2.5 screws fit into XL-320 servo horn
 
** Verified that new, long M2.5 screws fit into XL-320 servo horn
 
** Ordered micro-USB hub and correct power+data SATA cable for SSD (arrives Wednesday)
 
** Ordered micro-USB hub and correct power+data SATA cable for SSD (arrives Wednesday)
 +
** Got Dynamixel XL-320 to move!  Power switch was in wrong position?  Got GUI and position control from [http://emanual.robotis.com/docs/en/software/dynamixel/dynamixel_workbench/ here] working; velocity control still no go
 
* To do:
 
* To do:
 +
** Get joystick-based Dynamixel control integrated into bumbersnoot_boss
 
** Logs with timestamps, directory creation
 
** Logs with timestamps, directory creation
 
** Integrate RealSense capture code into bumbersnoot_boss
 
** Integrate RealSense capture code into bumbersnoot_boss
** Get Dynamixels actually turning on command
+
** Get multiple Dynamixels turning with velocity control
** Get joystick-based Dynamixel control integrated into bumbersnoot_boss
 
 
** Add SSD for mass storage
 
** Add SSD for mass storage
 
** Can micro-USB port be used for keyboard/mouse?  Or powered USB hub to allow camera along with keyboard/mouse?
 
** Can micro-USB port be used for keyboard/mouse?  Or powered USB hub to allow camera along with keyboard/mouse?

Revision as of 15:11, 25 June 2018

Shortened URL of this page: goo.gl/GPG8X9

Schedule

Week 1: June 18-22 -- Introduction/background
Week 2: June 25-29 -- Building
  • Monday
    • ROS joystick listener node called "bumbersnoot_boss" created
    • Changed Jetson hostname to bumbersnoot
    • Verified that new, long M2.5 screws fit into XL-320 servo horn
    • Ordered micro-USB hub and correct power+data SATA cable for SSD (arrives Wednesday)
    • Got Dynamixel XL-320 to move! Power switch was in wrong position? Got GUI and position control from here working; velocity control still no go
  • To do:
    • Get joystick-based Dynamixel control integrated into bumbersnoot_boss
    • Logs with timestamps, directory creation
    • Integrate RealSense capture code into bumbersnoot_boss
    • Get multiple Dynamixels turning with velocity control
    • Add SSD for mass storage
    • Can micro-USB port be used for keyboard/mouse? Or powered USB hub to allow camera along with keyboard/mouse?
Week 3: July 2-6 -- Building
  • To do:
    • Imitation learning test from tripod-mounted camera
    • Rough chassis assembled
    • Camera on robot
    • Jetson powered by battery
Week 4: July 9-13 -- Building
Week 5: July 16-20 -- Teaching/learning
Week 6: July 23-27-- Teaching/learning
Week 7: July 30-August 3 -- Write-up and presentation prep

Miscellaneous topics

Parts

On hand

  • Jetson TX2 dev kit
  • RealSense D435 depth camera
  • 4-port USB hub
  • Robotis
    • 5 x XL-320 servo
    • Dream 2 kit (includes small rubber wheels)
    • 2 x Li-ion battery LB-041, 2 x charger LBB-041
    • 3 x Li-ion battery LB-040 (one more back-ordered), 2 x charger LBB-040
    • 2 x OpenCM9.04C controller board

Needed

  • Jetson
    • Monitor, HDMI cable (expected 6/20)
    • Battery
    • Enclosure